QCMATIC: Welding Engineering (IWE) and Inspection Service in Turkiye-Turkey
Welding Consumables Standards
| EN ISO 544:2011 | Welding consumables – Technical delivery conditions for filler materials and fluxes – Type of product, dimensions, tolerances and markings (ISO 544:2011) |
| EN ISO 636:2015 | Welding consumables – Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels – Classification (ISO 636:2015) |
| EN ISO 1071:2015 | Welding consumables – Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron – Classification (ISO 1071:2015) |
| EN ISO 2560:2009 | Welding consumables – Covered electrodes for manual metal arc welding of non-alloy and fine grain steels – Classification (ISO 2560:2009) |
| EN ISO 3580:2011 | Welding consumables – Covered electrodes for manual metal arc welding of creep-resisting steels – Classification (ISO 3580:2010) |
| EN ISO 3581:2016 | Welding consumables – Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification (ISO 3581:2016) |
| EN ISO 3690:2012 | Welding and allied processes – Determination of hydrogen content in arc weld metal (ISO 3690:2012) |
| EN ISO 6847:2013 | Welding consumables – Deposition of a weld metal pad for chemical analysis (ISO 6847:2013) |
| EN ISO 6848:2015 | Arc welding and cutting – Nonconsumable tungsten electrodes – Classification (ISO 6848:2015) |
| EN ISO 8249:2000 | Welding – Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) |
| EN 12074:2000 | Welding consumables – Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| EN ISO 12153:2012 | Welding consumables – Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys – Classification (ISO 12153:2011) |
| EN 12536:2000 | Welding consumables – Rods for gas welding of non alloy and creep-resisting steels – Classification |
| EN 13479:2004 | Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials |
| EN ISO 14171:2016 | Welding consumables – Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification (ISO 14171:2016) |
| EN ISO 14172:2015 | Welding consumables – Covered electrodes for manual metal arc welding of nickel and nickel alloys – Classification (ISO 14172:2015) |
| EN ISO 14174:2012 | Welding consumables – Fluxes for submerged arc welding and electroslag welding – Classification (ISO 14174:2012) |
| EN ISO 14175:2008 | Welding consumables – Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008) |
| EN ISO 14341:2011 | Welding consumables – Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels – Classification (ISO 14341:2010) |
| EN ISO 14343:2009 | Welding consumables – Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels – Classification (ISO 14343:2009) |
| EN ISO 14344:2010 | Welding consumables – Procurement of filler materials and fluxes (ISO 14344:2010) |
| EN ISO 14372:2011 | Welding consumables – Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011) |
| EN 14532-1:2004 | Welding consumables – Test methods and quality requirements – Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14532-2:2004 | Welding consumables – Test methods and quality requirements – Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14532-3:2004 | Welding consumables – Test methods and quality requirements – Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| EN 14700:2014 | Welding consumables – Welding consumables for hard-facing |
| EN ISO 15792-1:2008 | Welding consumables – Test methods – Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000) |
| EN ISO 15792-1:2008/A1:2011 | Welding consumables – Test methods – Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/Amd 1:2011) |
| EN ISO 15792-2:2008 | Welding consumables – Test methods – Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000) |
| EN ISO 15792-3:2011 | Welding consumables – Test methods – Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld (ISO 15792-3:2011) |
| EN ISO 16834:2012 | Welding consumables – Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels – Classification (ISO 16834:2012) |
| EN ISO 17632:2015 | Welding consumables – Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels – Classification (ISO 17632:2015) |
| EN ISO 17633:2010 | Welding consumables – Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels – Classification (ISO 17633:2010) |
| EN ISO 17634:2015 | Welding consumables – Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels – Classification (ISO 17634:2015) |
| EN ISO 17777:2016 | Welding consumables – Covered electrodes for manual metal arc welding of copper and copper alloys – Classification (ISO 17777:2016) |
| EN ISO 18273:2015 | Welding consumables – Wire electrodes, wires and rods for welding of aluminium and aluminium alloys – Classification (ISO 18273:2015) |
| EN ISO 18274:2010 | Welding consumables – Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys – Classification (ISO 18274:2010) |
| EN ISO 18275:2012 | Welding consumables – Covered electrodes for manual metal arc welding of high-strength steels – Classification (ISO 18275:2011) |
| EN ISO 18276:2006 | Welding consumables – Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels – Classification (ISO 18276:2005) |
| EN ISO 19288:2016 | Welding consumables – Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys – Classification |
| EN ISO 21952:2012 | Welding consumables – Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels – Classification (ISO 21952:2012) |
| EN 22401:1994 | Covered electrodes – Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972) |
| EN ISO 24034:2010 | Welding consumables – Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys – Classification (ISO/FDIS 24034:2010) |
| EN ISO 24373:2009 | Welding consumables – Solid wires and rods for fusion welding of copper and copper alloys – Classification (ISO 24373:2008) |
| EN ISO 24598:2012 | Welding consumables – Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels – Classification (ISO 24598:2012) |
| EN ISO 26304:2011 | Welding consumables – Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels – Classification (ISO 26304:2011) |
Stud Welding Standards
| EN ISO 13918:2008 | Welding – Studs and ceramic ferrules for arc stud welding (ISO 13918:2008) |
| EN ISO 14555:2014 | Welding – Arc stud welding of metallic materials (ISO 14555:2014) |
| EN ISO 17683:2015 | Ships and marine technology – Ceramic weld backing for marine use (ISO 17683:2014) |
Welding Of Reinforcing Steel Standards
| CEN/TR 15481:2006 | Welding of reinforcing steel – Tack weldability – Test methods and performance requirements |
| EN ISO 17660-1:2006 | Welding – Welding of reinforcing steel – Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
| EN ISO 17660-2:2006 | Welding – Welding of reinforcing steel – Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
Brazing Standards
| EN 1045:1997 | Brazing – Fluxes for brazing – Classification and technical delivery conditions |
| EN ISO 3677:2016 | Filler metal for soldering and brazing – Designation (ISO 3677:2016) |
| EN ISO 10564:1997 | Soldering and brazing materials – Methods for the sampling of soft solders for analysis (ISO 10564:1993) |
| EN 12797:2000 | Brazing – Destructive tests of brazed joints |
| EN 12797:2000/A1:2003 | Brazing – Destructive tests of brazed joints |
| EN 12799:2000+A1:2003 | Brazing – Non-destructive examination of brazed joints |
| EN 13134:2000 | Brazing – Procedure approval |
| EN ISO 13585:2012 | Brazing – Qualification test of brazers and brazing operators (ISO 13585:2012) |
| EN 14324:2004 | Brazing – Guidance on the application of brazed joints |
| EN ISO 17672:2016 | Brazing – Filler metals (ISO 17672:2016) |
| EN ISO 18279:2003 | Brazing – Imperfections in brazed joints (ISO 18279:2003) |
Soldering Standards
| EN ISO 9453:2014 | Soft solder alloys – Chemical compositions and forms (ISO 9453:2014) |
| EN ISO 9454-1:2016 | Soft soldering fluxes – Classification and requirements – Part 1: Classification, labelling and packaging (ISO 9454-1:2016) |
| EN ISO 9454-2:2000 | Soft soldering fluxes – Classification and requirements – Part 2: Performance requirements (ISO 9454-2:1998) |
| EN 29455-1:1993 | Soft soldering fluxes – Test methods – Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:1990) |
| EN ISO 9455-2:1995 | Soft soldering fluxes – Test methods – Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993) |
| EN ISO 9455-3:1994 | Soft soldering fluxes – Test methods – Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:1992) |
| EN 9455-5:2014 | Soft soldering fluxes – Test methods – Part 5: Copper mirror test (ISO 9455-5:2014) |
| EN ISO 9455-6:1997 | Soft soldering fluxes – Test methods – Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995) |
| EN 29455-8:1993 | Soft soldering fluxes – Test methods – Part 8: Determination of zinc content (ISO 9455-8:1991) |
| EN ISO 9455-9:1995 | Soft soldering fluxes – Test methods – Part 9: Determination of ammonia content (ISO 9455-9:1993) |
| EN ISO 9455-10:2012 | Soft soldering fluxes – Test methods – Part 10: Flux efficacy test, solder spread method (ISO 9455-10:2012) |
| EN 29455-11:1993 | Soft soldering fluxes – Test methods – Part 11: Solubility of flux residues (ISO 9455-11:1991) |
| EN ISO 9455-13:1999 | Soft soldering fluxes – Test methods – Part 13: Determination of flux spattering (ISO 9455-13:1996) |
| EN 29455-14:1993 | Soft soldering fluxes – Test methods – Part 14: Assessment of tackiness of flux residues (ISO 9455-14:1991) |
| EN ISO 9455-15:1999 | Soft soldering fluxes – Test methods – Part 15: Copper corrosion test (ISO 9455-15:1996) |
| EN ISO 9455-16:2013 | Soft soldering fluxes – Test methods – Part 16: Flux efficacy test, wetting balance method (ISO 9455-16:2013) |
| EN ISO 9455-17:2006 | Soft soldering fluxes – Test methods – Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2002) |
| EN ISO 12224-1:1998 | Solder wire, solid and flux cored – Specification and test methods – Part 1: Classification and performance requirements (ISO 12224-1:1997) |
| EN ISO 12224-2:1999 | Flux cored solder wire – Specification and test methods – Part 2: Determination of flux content (ISO 12224-2:1997) |
| EN ISO 12224-3:2003 | Solder wire, solid and flux cored – Specifications and tests methods – Part 3: Wetting balance test method for flux cored solder wire efficacy (ISO 12224-3:2003) |
Welding Of Reinforcing Steel Standards
| CEN/TR 15481:2006 | Welding of reinforcing steel – Tack weldability – Test methods and performance requirements |
| EN ISO 17660-1:2006 | Welding – Welding of reinforcing steel – Part 1: Load-bearing welded joints (ISO 17660-1:2006) |
| EN ISO 17660-2:2006 | Welding – Welding of reinforcing steel – Part 2: Non load-bearing welded joints (ISO 17660-2:2006) |
Health and Safety in Welding and Allied Processes Standards
| EN ISO 10882-1:2011 | Health and safety in welding and allied processes – Sampling of airborne particles and gases in the operator’s breathing zone – Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| EN ISO 10882-2:2000 | Health and safety in welding and allied processes – Sampling of airborne particles and gases in the operator’s breathing zone – Part 2: Sampling of gases (ISO 10882-2:2000) |
| EN 14717:2005 | Welding and allied processes – Environmental check list |
| EN ISO 15011-1:2009 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009) |
| EN ISO 15011-2:2009 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc wel |
| EN ISO 15011-3:2009 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 3: Determination of ozone emission rate during arc welding (ISO 15011-3:2009) |
| EN ISO 15011-4:2006/A1:2008 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 4: Fume data sheets (ISO 15011-4:2006) |
| EN ISO 15011-5:2011 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials us |
| CEN ISO/TS 15011-6:2012 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) |
| CEN ISO/TS 15011-6:2012/AC:2012 | Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding – Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) |
| EN ISO 15012-1:2013 | Health and safety in welding and allied processes – Equipment for capture and separation of welding fume – Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| EN ISO 15012-2:2008 | Health and safety in welding and allied processes – Requirements, testing and marking of equipment for air filtration – Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles (ISO 15012-2:2008) |
| EN ISO 15012-4:2016 | Health and safety in welding and allied processes – Equipment for capture and separation of welding fume – Part 4: General requirements (ISO 15012-4:2016) |
| EN ISO 17916:2016 | Safety of thermal cutting machines (ISO 17916:2016) |
| EN ISO 25980: 2014 | Health and safety in welding and allied processes – Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2014) |
Testing Of Welds Standards
| EN ISO 10863:2011 | Non-destructive testing of welds – Ultrasonic testing – Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011) |
| EN ISO 11666:2010 | Non-destructive testing of welds – Ultrasonic testing – Acceptance levels (ISO 11666:2010) |
| EN ISO 13588:2012 | Non-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology (ISO 13588:2012) |
| CEN/TR 15135:2005 | Welding – Design and non-destructive testing of welds |
| EN ISO 15626:2013 | Non-destructive testing of welds – Time-of-flight diffraction technique (TOFD) – Acceptance levels (ISO 15626:2011) |
| EN ISO 17643:2015 | Non-destructive testing of welds – Eddy current examination of welds by complex plane analysis (ISO 17643:2015) |
| EN ISO 17635:2016 | Non-destructive testing of welds – General rules for metallic materials (ISO 17635:2016) |
| EN ISO 17636-1:2013 | Non-destructive testing of welds – Radiographic testing – Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN ISO 17636-2:2013 | Non-destructive testing of welds – Radiographic testing – Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| EN ISO 17637:2016 | Non-destructive testing of welds – Visual testing of fusion-welded joints (ISO 17637:2016) |
| EN ISO 17638:2016 | Non-destructive testing of welds – Magnetic particle testing (ISO 17638:2016) |
| EN ISO 17640:2010 | Non-destructive testing of welds – Ultrasonic testing – Techniques, testing levels, and assessment (ISO 17640:2010) |
| EN ISO 22825:2012 | Non-destructive testing of welds – Ultrasonic testing – Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012) |
| EN ISO 23277:2015 | Non-destructive testing of welds – Penetrant testing of welds – Acceptance levels (ISO 23277:2015) |
| EN ISO 23278:2015 | Non-destructive testing of welds – Magnetic particle testing of welds – Acceptance levels (ISO 23278:2015) |
| EN ISO 23279:2010 | Non-destructive testing of welds – Ultrasonic testing – Characterization of indications in welds (ISO 23279:2010) |
Gas Welding & Cutting Standards
| EN 560:2005 | Gas welding equipment – Hose connections for equipment for welding, cutting and allied processes |
| EN 560:2005/AC:2007 | Gas welding equipment – Hose connections for equipment for welding, cutting and allied processes |
| EN 561:2002 | Gas welding equipment – Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| EN 730-1:2002 | Gas welding equipment – Safety devices – Part 1: Incorporating a flame (flashback) arrestor |
| EN 730-2:2002 | Gas welding equipment – Safety devices – Part 2: Not incorporating a flame (flashback) arrestor |
| EN 1256:2006 | Gas welding equipment – Specification for hose assemblies for equipment for welding, cutting and allied processes |
| EN 1326:1996 | Gas welding equipment – Small kits for gas brazing and welding |
| EN 1327:1996 | Gas welding equipment – Thermoplastic hoses for welding and allied processes |
| EN ISO 2503:2009 | Gas welding equipment – Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009) |
| EN ISO 2503:2009/ A1:2015 | Gas welding equipment – Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009/Amd 1:2015) |
| EN ISO 3821:2010 | Gas welding equipment – Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| EN ISO 5171:2010 | Gas welding equipment – Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) |
| EN ISO 5172:2006 | Gas welding equipment – Blowpipes for gas welding, heating and cutting – Specifications and tests (ISO 5172:2006) |
| EN ISO 5172:2006/A1:2012 | Gas welding equipment – Blowpipes for gas welding, heating and cutting – Specifications and tests – Amendment 1 (ISO 5172:2006/Amd 1:2012) |
| EN ISO 5172:2006/A2:2015 | Gas welding equipment – Blowpipes for gas welding, heating and cutting – Specifications and tests (ISO 5172:2006/Amd 2:2015) |
| EN ISO 7287:2002 | Graphical symbols for thermal cutting equipment (ISO 7287:2002) |
| EN ISO 7291:2010 | Gas welding equipment – Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010) |
| EN ISO 7291:2010/ A1:2015 | Gas welding equipment – Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015) |
| EN ISO 9012:2011 | Gas welding equipment – Air-aspirated hand blowpipes – Specifications and tests (ISO 9012:2008) |
| EN ISO 9013:2017 | Thermal cutting – Classification of thermal cuts – Geometrical product specification and quality tolerances (ISO 9013:2017) |
| EN ISO 9539:2010 | Gas welding equipment – Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) |
| EN ISO 9539:2010/A1:2013 | Gas welding equipment – Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) |
| CEN/TR 13259:2013 | Gas welding equipment – Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
| EN 13622:2002 | Gas welding equipment – Terminology – Terms used for gas welding equipment |
| EN ISO 14113:2013 | Gas welding equipment – Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| EN ISO 14114:2014 | Gas welding equipment – Acetylene manifold systems for welding, cutting and allied processes – General requirements (ISO 14114:2014) |
| CEN/TR 15068:2009 | Gas welding equipment – Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering – Measurement method |
| EN ISO 15615:2013 | Gas welding equipment – Acetylene manifold systems for welding, cutting and allied processes – Safety requirements in high-pressure devices (ISO 15615:2013) |
| EN 28206:1992 | Acceptance tests for oxygen cutting machines – Reproducible accuracy – Operational characteristics (ISO 8206:1991) |
| EN 29090:1992 | Gas tightness of equipment for gas welding and allied processes (ISO 9090:1989) |
Welding Processes Quality Management Standards
| EN 1011-1:2009 | Welding – Recommendations for welding of metallic materials – Part 1: General guidance for arc welding |
| EN 1011-2:2001 | Welding – Recommendations for welding of metallic materials – Part 2: Arc welding of ferritic steels |
| EN 1011-2:2001/A1:2003 | Welding – Recommendations for welding of metallic materials – Part 2: Arc welding of ferritic steels |
| EN 1011-3:2000 | Welding – Recommendations for welding of metallic materials – Part 3: Arc welding of stainless steels |
| EN 1011-3:2000/A1:2003 | Welding – Recommendations for welding of metallic materials – Part 3: Arc welding of stainless steels |
| EN 1011-4:2000 | Welding – Recommendations for welding of metallic materials – Part 4: Arc welding of aluminium and aluminium alloys |
| EN 1011-4:2000/A1:2003 | Welding – Recommendations for welding of metallic materials – Part 4: Arc welding of aluminium and aluminium alloys |
| EN 1011-5:2003 | Welding – Recommendations for welding of metallic materials – Part 5: Welding of clad steel |
| EN 1011-6:2005 | Welding – Recommendation for welding of metallic materials – Part 6: Laser beam welding |
| EN 1011-7:2004 | Welding – Recommendations for welding of metallic materials – Part 7: Electron beam welding |
| EN 1708-1:2010 | Welding – Basic welded joint details in steel – Part 1: Pressurized components |
| EN 1708-2:2000 | Welding – Basic weld joint details in steel – Part 2: Non internal pressurized components |
| EN 1708-3:2012 | Welding – Basic weld joint details in steel – Part 3: Clad, buttered and lined pressurized components |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials – Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials – Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials – Part 3: Standard quality requirements (ISO 3834-3:2005) |
| EN ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials – Part 4: Elementary quality requirements (ISO 3834-4:2005) |
| EN ISO 3834-5:2015 | Quality requirements for fusion welding of metallic materials – Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2015) |
| CEN ISO/TR 3834-6:2007 | Quality requirements for fusion welding of metallic materials – Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007) |
| EN ISO 5817:2014 | Welding – Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) – Quality levels for imperfections (ISO 5817:2014) |
| EN ISO 9606-1:2013 | Qualification testing of welders – Fusion welding – Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012) |
| EN ISO 9606-2:2004 | Qualification test of welders – Fusion welding – Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN ISO 9606-3:1999 | Approval testing of welders – Fusion welding – Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| EN ISO 9606-4:1999 | Approval testing of welders – Fusion welding – Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| EN ISO 9606-5:2000 | Approval testing of welders – Fusion welding – Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN ISO 9692-1:2013 | Welding and allied processes – Types of joint preparation – Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013) |
| EN ISO 9692-2:1998 | Welding and allied processes – Joint preparation – Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-2:1998/AC:1999 | Welding and allied processes – Joint preparation – Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-3:2016 | Welding and allied processes – Recommendations for joint preparation – Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016) |
| EN ISO 9692-4:2003 | Welding and allied processes – Recommendations for joint preparation – Part 4: Clad steels (ISO 9692-4:2003) |
| EN ISO 10042:2005 | Welding – Arc-welded joints in aluminium and its alloys – Quality levels for imperfections (ISO 10042:2005) |
| EN ISO 10042:2005/AC:2006 | Welding – Arc-welded joints in aluminium and its alloys – Quality levels for imperfections (ISO 10042:2005) |
| EN ISO 12932:2013 | Welding – Laser-arc hybrid welding of steels, nickel and nickel alloys – Quality levels for imperfections (ISO 12932:2013) |
| EN ISO 13916:1996 | Welding – Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996) |
| EN ISO 13919-1:1996 | Welding – Electrons and laser beam welded joints – Guidance on quality levels for imperfections – Part 1: Steel (ISO 13919-1:1996) |
| EN ISO 13919-2:2001 | Welding – Electron and laser beam welded joints – Guidance on quality levels for imperfections – Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 13919-2:2001/A1:2003 | Welding – Electron and laser beam welded joints – Guidance on quality levels for imperfections – Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 13920:1996 | Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position (ISO 13920:1996) |
| EN ISO 14731:2006 | Welding coordination – Tasks and responsibilities (ISO 14731:2006) |
| EN ISO 14732:2013 | Welding personnel – Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| EN ISO 14744-1:2008 | Welding – Acceptance inspection of electron beam welding machines – Part 1: Principles and acceptance conditions (ISO 14744-1:2008) |
| EN ISO 14744-2:2000 | Welding – Acceptance inspection of electron beam welding machines – Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000) |
| EN ISO 14744-3:2000 | Welding – Acceptance inspection of electron beam welding machines – Part 3: Measurement of beam current characteristics (ISO 14744-3:2000) |
| EN ISO 14744-4:2000 | Welding – Acceptance inspection of electron beam welding machines – Part 4: Measurement of welding speed (ISO 14744-4:2000) |
| EN ISO 14744-5:2000 | Welding – Acceptance inspection of electron beam welding machines – Part 5: Measurement of run-out accuracy (ISO 14744-5:2000) |
| EN ISO 14744-6:2000 | Welding – Acceptance inspection of electron beam welding machines – Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
| CEN ISO/TR 14745: 2015 | Welding – Post-weld heat treatment parameters for steels (ISO/TR 14745:2015) |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials – General rules (ISO 15607:2003) |
| CEN ISO/TR 15608:2017 | Welding – Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 2: Gas welding (ISO 15609-2:2001) |
| EN ISO 15609-2:2001/A1:2003 | Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 2: Gas welding (ISO 15609-2:2001) |
| EN ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials – Welding procedures specification – Part 3: Electron beam welding (ISO 15609-3:2004) |
| EN ISO 15609-4:2009 | Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 4: Laser beam welding (ISO 15609-4:2009) |
| EN ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01) |
| EN ISO 15609-6:2013 | Specification and qualification of welding procedures for metallic materials – Welding procedure specification – Part 6: Laser-arc hybrid welding (ISO 15609-6:2013) |
| EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials – Qualification based on tested welding consumables (ISO 15610:2003) |
| EN ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials – Qualification based on previous welding experience (ISO 15611:2003) |
| EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials – Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials – Qualification based on pre-production welding test (ISO 15613:2004) |
| EN ISO 15614-1:2004 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) |
| EN ISO 15614-1:2004/A1:2008 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) |
| EN ISO 15614-1:2004/A2:2012 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004) |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN ISO 15614-2:2005/AC:2009 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005/Cor 2:2009) |
| EN ISO 15614-3:2008 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) |
| EN ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005) |
| EN ISO 15614-4:2005/AC:2007 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005/Cor 1:2007) |
| EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| EN ISO 15614-7:2016 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 7: Overlay welding (ISO 15614-7:2016) |
| EN ISO 15614-8:2016 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
| EN ISO 15614-10:2005 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 10: Hyperbaric dry welding (ISO 15614-10:2005) |
| EN ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| EN ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 12: Spot, seam and projection welding (ISO 15614-12:2014) |
| EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
| EN ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting – Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
| EN ISO 15616-2:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting – Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| EN ISO 15616-3:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting – Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| EN ISO 15618-1:2016 | Qualification testing of welders for underwater welding – Part 1: Hyperbaric wet welding (ISO 15618-1:2016) |
| EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding – Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN ISO 17658:2015 | Welding – Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts – Terminology (ISO 17658:2002) |
| EN ISO 17652-1:2003 | Welding – Test for shop primers in relation to welding and allied processes – Part 1: General requirements (ISO 17652-1:2003) |
| EN ISO 17652-2:2003 | Welding – Test for shop primers in relation to welding and allied processes – Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
| EN ISO 17652-3:2003 | Welding – Test for shop primers in relation to welding and allied processes – Part 3: Thermal cutting (ISO 17652-3:2003) |
| EN ISO 17652-4:2003 | Welding – Test for shop primers in relation to welding and allied processes – Part 4: Emission of fumes and gases (ISO 17652-4:2003) |
| EN ISO 17662:2016 | Welding – Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN ISO 17663:2009 | Welding – Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009) |
| CEN ISO/TR 17844:2004 | Welding – Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004) |
| CEN ISO/TR 18166:2016 | Numerical welding simulation – Execution and documentation |
| CEN ISO/TR 20172:2009 | Welding – Grouping systems for materials – European materials (ISO/TR 20172:2009) |
| CEN ISO/TR 20173:2009 | Welding – Grouping systems for materials – American materials (ISO/TR 20173:2009) |
| CEN ISO/TR 20174:2005 | Welding – Grouping systems for materials – Japanese materials (ISO/TR 20174:2005) |
| EN ISO 22827-1:2005 | Acceptance tests for Nd:YAG laser beam welding machines – Machines with optical fibre delivery – Part 1: Laser assembly (ISO 22827-1:2005) |
| EN ISO 22827-2:2005 | Acceptance tests for Nd:YAG laser beam welding machines – Machines with optical fibre delivery – Part 2: Moving mechanism (ISO 22827-2:2005) |
Destructive Testing on Welds in Metallic Materials Standards
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials – Transverse tensile test (ISO 4136:2012) |
| EN ISO 5173:2010 | Destructive tests on welds in metallic materials – Bend tests (ISO 5173:2009) |
| EN ISO 5173:2010/A1:2011 | Destructive tests on welds in metallic materials – Bend tests – Amendment 1 (ISO 5173:2009/Amd 1:2011) |
| EN ISO 5178:2011 | Destructive tests on welds in metallic materials – Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) |
| EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials – Hardness testing – Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| EN ISO 9015-2:2016 | Destructive tests on welds in metallic materials – Hardness testing – Part 2: Microhardness testing of welded joints (ISO 9015-2:2016) |
| EN ISO 9016:2012 | Destructive tests on welds in metallic materials – Impact tests – Test specimen location, notch orientation and examination (ISO 9016:2012) |
| EN ISO 9017:2013 | Destructive tests on welds in metallic materials – Fracture test (ISO 9017:2001) |
| EN ISO 9018:2015 | Destructive tests on welds in metallic materials – Tensile test on cruciform and lapped joints (ISO 9018:2015) |
| EN ISO 12996:2013 | Mechanical joining – Destructive testing of joints – Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013) |
| EN ISO 16060:2014 | Destructive tests on welds in metallic materials – Etchants for macroscopic and microscopic examination (ISO/TR 16060:2003) |
| EN ISO 17639:2013 | Destructive tests on welds in metallic materials – Macroscopic and microscopic examination of welds (ISO 17639:2003) |
| EN ISO 17641-1:2004 | Destructive tests on welds in metallic materials – Hot cracking tests for weldments – Arc welding processes – Part 1: General (ISO 17641-1:2004) |
| EN ISO 17641-2:2015 | Destructive tests on welds in metallic materials – Hot cracking tests for weldments – Arc welding processes – Part 2: Self-restraint tests (ISO 17641-2:2015) |
| CEN ISO/TR 17641-3:2005 | Destructive tests on welds in metallic materials – Hot cracking tests for weldments – Arc welding processes – Part 3: Externally loaded tests (ISO/TR 17641-3:2005) |
| EN ISO 17642-1:2004 | Destructive tests on welds in metallic materials – Cold cracking tests for weldments – Arc welding processes – Part 1: General (ISO 17642-1:2004) |
| EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials – Cold cracking tests for weldments – Arc welding processes – Part 2: Self-restraint tests (ISO 17642-2:2005) |
| EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials – Cold cracking tests for weldments – Arc welding processes – Part 3: Externally loaded tests (ISO 17642-3:2005) |
Friction Welding Standards
| EN ISO 15620:2000 | Welding – Friction welding of metallic materials (ISO 15620:2000) |
| EN ISO 25239-1:2011 | Friction stir welding – Aluminium – Part 1: Vocabulary (ISO 25239-1:2011) |
| EN ISO 25239-2:2011 | Friction stir welding – Aluminium – Part 2: Design of weld joints (ISO 25239-2:2011) |
| EN ISO 25239-3:2011 | Friction stir welding – Aluminium – Part 3: Qualification of welding operators (ISO 25239-3:2011) |
| EN ISO 25239-4:2011 | Friction stir welding – Aluminium – Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011) |
| EN ISO 25239-5:2011 | Friction stir welding – Aluminium – Part 5: Quality and inspection requirements (ISO 25239-5:2011) |
Resistance Welding Standards
| EN ISO 669:2016 | Resistance welding – Resistance welding equipment – Mechanical and electrical requirements (ISO 669:2016) |
| EN ISO 5182:2016 | Resistance welding – Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| EN ISO 5183-1:2000 | Resistance welding equipment – Electrode adaptors, male taper 1:10 – Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998) |
| EN ISO 5183-2:2001 | Resistance spot welding – Electrode adaptors, male taper 1:10 – Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
| EN ISO 5821:2009 | Resistance welding – Spot welding electrode caps (ISO 5821:2009) |
| EN ISO 5826:2014 | Resistance welding equipment – Transformers – General specifications applicable to all transformers (ISO 5826:2014) |
| EN ISO 5828:2001 | Resistance welding equipment – Secondary connecting cables with terminals connected to water-cooled lugs – Dimensions and characteristics (ISO 5828:2001) |
| EN ISO 8166:2003 | Resistance welding – Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003) |
| EN ISO 8205-1:2002 | Water-cooled secondary connection cables for resistance welding – Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002) |
| EN ISO 8205-2:2002 | Water-cooled secondary connection cables for resistance welding – Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002) |
| EN ISO 8205-3:2012 | Water-cooled secondary connection cables for resistance welding – Part 3: Test requirements (ISO 8205-3:2012) |
| EN ISO 8430-1:2016 | Resistance spot welding – Electrode holders – Part 1: Taper fixing 1:10 (ISO 8430-1:2016) |
| EN ISO 8430-2:2016 | Resistance spot welding – Electrode holders – Part 2: Morse taper fixing (ISO 8430-2:2016) |
| EN ISO 8430-3:2016 | Resistance spot welding – Electrode holders – Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) |
| EN ISO 9312:2013 | Resistance welding equipment – Insulated pins for use in electrode back-ups (ISO 9312:2013) |
| EN ISO 10447:2015 | Resistance welding – Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015) |
| EN ISO 14270:2016 | Resistance welding – Destructive testing of welds – Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016) |
| EN ISO 14271:2011 | Resistance welding – Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011) |
| EN ISO 14271:2011/AC:2012 | Resistance welding – Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds – Technical Corrigendum 1 (ISO 14271:2011/Cor 1:2012) |
| EN ISO 14272:2016 | Resistance welding – Destructive testing of welds – Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016) |
| EN ISO 14273:2016 | Resistance welding – Destructive testing of welds – Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016) |
| EN ISO 14323:2015 | Resistance spot welding and projection welds – Destructive testing of welds – Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2015) |
| EN ISO 14324:2003 | Resistance spot welding – Destructive tests of welds – Method for the fatigue testing of spot welded joints (ISO/FDIS 14324:2003) |
| EN ISO 14327:2004 | Resistance welding – Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004) |
| EN ISO 14329:2003 | Resistance welding – Destructive tests of welds – Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003) |
| EN ISO 14373:2015 | Resistance welding – Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| EN ISO 14554-1:2013 | Quality requirements for welding – Resistance welding of metallic materials – Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
| EN ISO 14554-2:2013 | Quality requirements for welding – Resistance welding of metallic materials – Part 2: Elementary quality requirements (ISO 14554-2:2013) |
| EN ISO 16432:2007 | Resistance welding – Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
| EN ISO 16433:2007 | Resistance welding – Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
| EN ISO 17653:2012 | Resistance welding – Destructive tests on welds in metallic materials – Torsion test of resistance spot welds (ISO 17653:2012) |
| EN ISO 17654:2011 | Resistance welding – Destructive tests of welds – Pressure test of resistance seam welds (ISO 17654:2011) |
| EN ISO 17657-1:2007 | Resistance welding – Welding current measurement for resistance welding – Part 1: Guidelines for measurement (ISO 17657-1:2005) |
| EN ISO 17657-2:2007 | Resistance welding – Welding current measurement for resistance welding – Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005) |
| EN ISO 17657-3:2007 | Resistance welding – Welding current measurement for resistance welding – Part 3: Current sensing coil (ISO 17657-3:2005) |
| EN ISO 17657-4:2007 | Resistance welding – Welding current measurement for resistance welding – Part 4: Calibration system (ISO 17657-4:2005) |
| EN ISO 17657-5:2007 | Resistance welding – Welding current measurement for resistance welding – Part 5: Verification of welding current measuring system (ISO 17657-5:2005) |
| EN ISO 17677-1:2009 | Resistance welding – Vocabulary – Part 1: Spot, projection and seam welding (ISO 17677-1:2009) |
| EN ISO 18278-1:2015 | Resistance welding – Weldability – Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| EN ISO 18278-2:2016 | Resistance welding – Weldability – Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016) |
| EN ISO 18592:2009 | Resistance welding – Destructive testing of welds – Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009) |
| EN ISO 18594:2007 | Resistance spot-, projection- and seam-welding – Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007) |
| EN ISO 18595:2007 | Resistance welding – Spot welding of aluminium and aluminium alloys – Weldability, welding and testing (ISO 18595:2007) |
| EN 20693:1991 | Dimensions of seam welding wheel blanks (ISO 693:1982) |
| EN 20865:1991 | Slots in plates for projection welding machines (ISO 865:1981) |
| EN 21089:1991 | Electrode taper fits for spot welding equipment – Dimensions (ISO 1089:1980) |
| EN ISO 22829:2008 | Resistance welding – Transformer-rectifier for welding guns with integrated transformers – Transformer-rectifier units operating at 1000 Hz frequency (ISO 22829:2007) |
| EN 25184:1994 | Straight resistance spot welding electrodes (ISO 5184:1979) |
| EN 25822:1991 | Spot welding equipment – Taper plug gauges and taper ring gauges (ISO 5822:1988) |
| EN 25827:1992 | Spot welding – Electrode back-ups and clamps (ISO 5827:1983) |
| EN 27286:1991 | Graphical symbols for resistance welding equipment (ISO 7286:1986) |
| EN 27931:1992 | Insulation caps and bushes for resistance welding equipment (ISO 7931:1985) |
| EN 28167:1992 | Projections for resistance welding (8167:1989) |
| EN 29313:1992 | Resistance spot welding equipment – Cooling tubes (ISO 9313:1989) |
Terminology Standards of Welding And Allied Processes
| EN 1792:2003 | Welding – Multilingual list of terms for welding and related processes |
| EN ISO 2553:2013 | Welding and allied processes – Symbolic representation on drawings – Welded joints (ISO 2553:2013) |
| EN ISO 4063:2010 | Welding and allied processes – Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN ISO 6520-1:2007 | Welding and allied processes – Classification of geometric imperfections in metallic materials – Part 1: Fusion welding (ISO 6520-1:2007) |
| EN ISO 6520-2:2013 | Welding and allied processes – Classification of geometric imperfections in metallic materials – Part 2: Welding with pressure (ISO 6520-2:2013) |
| EN ISO 6947:2011 | Welding and allied processes – Welding positions (ISO 6947:2011) |
| EN 12584:1999 | Imperfections in oxyfuel flame cuts, laser beams cuts and plasma cuts – Terminology |
| EN 14610:2004 | Welding and allied processes – Definitions of metal welding processes |
| CEN/TR 14633:2003 | Welding – Working positions – Comparison of current international, European and US designations |
| CEN/TR 14599:2005 | Terms and definitions for welding purposes in relation with EN 1792 |
| CEN/TR 15235:2005 | Welding – Methods for assessing imperfections in metallic structures |
| EN ISO 15653:2010 | Metallic materials – Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010) |
| EN ISO 17659:2004 | Welding – Multilingual terms for welded joints with illustrations (ISO 17659:2002) |
| CEN ISO/TS 17845:2004 | Welding and allied processes – Designation system for imperfections (ISO/TS 17845:2004) |
