
QCMATIC: Mastering Quality, Engineering Success
QCMATIC: Quality Control, Inspection, Expediting and Audit Services in TURKEY
EN Standards For Shipbuilding and Maritime Structures
| Reference | Title |
| EN ISO 4566:1995 | Small craft with inboard engine – Propeller shaft ends and bosses with 1 : 10 taper (ISO 4566:1992) |
| EN ISO 6185-1:2001 | Inflatable boats – Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
| EN ISO 6185-2:2001 | Inflatable boats – Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
| EN ISO 6185-3:2014 | Inflatable boats – Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| EN ISO 6185-4:2011 | Inflatable boats – Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| EN ISO 7840:2013 | Small craft – Fire-resistant fuel hoses (ISO 7840:2013) |
| EN ISO 8099:2000 | Small craft – Toilet waste retention systems (ISO 8099:2000) |
| EN ISO 8469:2013 | Small craft – Non-fire-resistant fuel hoses (ISO 8469:2013) |
| EN ISO 8665:2006 | Small craft – Marine propulsion reciprocating internal combustion engines – Power measurements and declarations (ISO 8665:2006) |
| EN ISO 8666:2016 | Small craft – Principal data (ISO 8666:2016) |
| EN ISO 8847:2004 | Small craft – Steering gear – Cable and pulley systems (ISO 8847:2004) |
| EN ISO 8847:2004/AC:2005 | Small craft – Steering gear – Cable and pulley systems (ISO 8847:2004) |
| EN ISO 8849:2003 | Small craft – Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
| EN ISO 9093-1:1997 | Small craft – Seacocks and through-hull fittings – Part 1: Metallic (ISO 9093-1:1994) |
| EN ISO 9093-2:2002 | Small craft – Seacocks and through-hull fittings – Part 2: Non-metallic (ISO 9093-2:2002) |
| EN ISO 9094:2015 | Small craft – Fire protection (ISO 9094:2015) |
| EN ISO 9097:1994 | Small craft – Electric fans (ISO 9097:1991) |
| EN ISO 9097:1994/A1:2000 | Small craft – Electric fans (ISO 9097:1991) |
| EN ISO 10087:2006 | Small craft – Craft identification – Coding system (ISO 10087:2006) |
| EN ISO 10088:2013 | Small craft – Permanently installed fuel systems (ISO 10088:2013) |
| EN ISO 10133:2012 | Small craft – Electrical systems – Extra-low-voltage d.c. installations (ISO 10133:2012) |
| EN ISO 10239:2014 | Small craft – Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
| EN ISO 10240:2004 | Small craft – Owner’s manual (ISO 10240:2004) |
| EN ISO 10240:2004/A1:2015 | Small craft – Owner’s manual (ISO 10240:2004/Amd 1:2015) |
| EN ISO 10592:1995 | Small craft – Hydraulic steering systems (ISO 10592:1994) |
| EN ISO 10592:1995/A1:2000 | Small craft – Hydraulic steering systems (ISO 10592:1994) |
| EN ISO 11105:1997 | Small craft – Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) |
| EN ISO 11192:2005 | Small craft – Graphical symbols (ISO 11192:2005) |
| EN ISO 11547:1995 | Small craft – Start-in-gear protection (ISO 11547:1994) |
| EN ISO 11547:1995/A1:2000 | Small craft – Start-in-gear protection (ISO 11547:1994) |
| EN ISO 11591:2011 | Small craft, engine-driven – Field of vision from helm position (ISO 11591:2011) |
| EN ISO 11592-1:2016 | Small craft – Determination of maximum propulsion power rating using manoeuvring speed – Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016) |
| EN ISO 11812:2001 | Small craft – Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
| EN ISO 12215-1:2000 | Small craft – Hull construction and scantlings – Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| EN ISO 12215-2:2002 | Small craft – Hull construction and scantlings – Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| EN ISO 12215-3:2002 | Small craft – Hull construction and scantlings – Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| EN ISO 12215-4:2002 | Small craft – Hull construction and scantlings – Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| EN ISO 12215-5:2008 | Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
| EN ISO 12215-5:2008/A1:2014 | Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination – Amendment 1 (ISO 12215-5:2008/Amd 1:2014) |
| EN ISO 12215-6:2008 | Small craft – Hull construction and scantlings – Part 6: Structural arrangements and details (ISO 12215-6:2008) |
| EN ISO 12215-8:2009 | Small craft – Hull construction and scantlings – Part 8: Rudders (ISO 12215-8:2009) |
| EN ISO 12215-8:2009/AC:2010 | Small craft – Hull construction and scantlings – Part 8: Rudders – Technical Corrigendum 1 (ISO 12215-8:2009/Cor 1:2010) |
| EN ISO 12215-9:2012 | Small craft – Hull construction and scantlings – Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| EN ISO 12216:2002 | Small craft – Windows, portlights, hatches, deadlights and doors – Strength and watertightness requirements (ISO 12216:2002) |
| EN ISO 12217-1:2015 | Small craft – Stability and buoyancy assessment and categorization – Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| EN ISO 12217-2:2015 | Small craft – Stability and buoyancy assessment and categorization – Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| EN ISO 12217-3:2015 | Small craft – Stability and buoyancy assessment and categorization – Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| EN ISO 13297:2014 | Small craft – Electrical systems – Alternating current installations (ISO 13297:2014) |
| EN ISO 13590:2003 | Small craft – Personal watercraft – Construction and system installation requirements (ISO 13590:2003) |
| EN ISO 13590:2003/AC:2004 | Small craft – Personal watercraft – Construction and system installation requirements (ISO 13590:2003) |
| EN ISO 13929:2001 | Small craft – Steering gear – Geared link systems (ISO 13929:2001) |
| EN ISO 14509-1:2008 | Small craft – Airborne sound emitted by powered recreational craft – Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
| EN ISO 14509-2:2006 | Small craft – Airborne sound emitted by powered recreational craft – Part 2: Sound assessment using reference craft (ISO 14509-2:2006) |
| EN ISO 14509-3:2009 | Small craft – Airborne sound emitted by powered recreational craft – Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
| EN ISO 14895:2016 | Small craft – Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) |
| EN ISO 14945:2004 | Small craft – Builder’s plate (ISO 14945:2004) |
| EN ISO 14945:2004/AC:2005 | Small craft – Builder’s plate (ISO 14945:2004) |
| EN ISO 14946:2001 | Small craft – Maximum load capacity (ISO 14946:2001) |
| EN ISO 14946:2001/AC:2005 | Small craft – Maximum load capacity (ISO 14946:2001) |
| EN ISO 15083:2003 | Small craft – Bilge-pumping systems (ISO 15083:2003) |
| EN ISO 15084:2003 | Small craft – Anchoring, mooring and towing – Strong points (ISO 15084:2003) |
| EN ISO 15085:2003 | Small craft – Man-overboard prevention and recovery (ISO 15085:2003) |
| EN ISO 15085:2003/A1:2009 | Small craft – Man-overboard prevention and recovery – Amendment 1 (ISO 15085:2003/Amd 1:2009) |
| EN ISO 15584:2001 | Small craft – Inboard petrol engines – Engine-mounted fuel and electrical components (ISO 15584:2001) |
| EN ISO 15652:2005 | Small craft – Remote steering systems for inboard mini jet boats (ISO 15652:2003) |
| EN ISO 16147:2002 | Small craft – Inboard diesel engines – Engine-mounted fuel and electrical components (ISO 16147:2002) |
| EN ISO 16147:2002/A1:2013 | Small craft – Inboard diesel engines – Engine-mounted fuel and electrical components – Amendment 1 (ISO 16147:2002/Amd 1:2013) |
| EN ISO 16180:2013 | Small craft – Navigation lights – Installation, placement and visibility (ISO 16180:2013) |
| EN ISO 16315:2016 | Small craft – Electric propulsion system (ISO 16315:2016) |
| EN ISO 18854:2015 | Small craft – Reciprocating internal combustion engines exhaust emission measurement – Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
| EN ISO 19009:2015 | Small craft – Electric navigation lights – Performance of LED lights (ISO 19009:2015) |
| EN ISO 21487:2012 | Small craft – Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
| EN ISO 21487:2012/A1:2014 | Small craft – Permanently installed petrol and diesel fuel tanks – Amendment 1 (ISO 21487:2012/Amd 1:2014) |
| EN ISO 21487:2012/A2:2015 | Small craft – Permanently installed petrol and diesel fuel tanks – Amendment 2 (ISO 21487:2012/Amd 2:2015) |
| EN ISO 25197:2012 | Small craft – Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
| EN ISO 25197:2012/A1:2014 | Small craft – Electrical/electronic control systems for steering, shift and throttle – Amendment 1 (ISO 25197:2012/Amd 1:2014) |
| EN 28846:1993 | Small craft – Electrical devices – Protection against ignition of surrounding flammable gases (ISO 8846:1990) |
| EN 28846:1993/A1:2000 | Small craft – Electrical devices – Protection against ignition of surrounding flammable gases (ISO 8846:1990) |
| EN 28848:1993 | Small craft – Remote steering systems (ISO 8848:1990) |
| EN 28848:1993/A1:2000 | Small craft – Remote steering systems (ISO 8848:1990) |
| EN 29775:1993 | Small craft – Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) |
| EN 29775:1993/A1:2000 | Small craft – Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) |
